For detailed information, other images and documents, please select individual articles from the following table.
Rost-Off Ice rust remover Rost-Off Ice
High-quality rust remover with crack effect due to extreme cooling and excellent creep effect.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Crack effect
- By cooling down the material surface, e.g. on the thread stud bolt, to -40 °C, micro-fine cracks occur in the corrosion layer at the connection points. These "crack open" the rust, ensuring better penetration of the active agent.
Outstanding capillary action
- Optimal creep properties and the crack effect result in excellent rust penetration.
Optimum rust removal
- Rust is quickly penetrated and seized screws are loosened.
- Heavily rusted screw connections are loosened without damaging them.
Corrosion protection additives for optimum corrosion protection
- Provides protection against further corrosion
Resin- and acid-free
Silicone-free
Compatible with rubber and seals
- Remove excess material or splashes immediately from sensitive and painted surfaces.
- Resin- and acid-free
- Silicone-free
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
For non-destructive loosening of extremely rusty and oxidised screw connections on passenger cars, lorries, agricultural machines, construction machines, equipment and devices.
Remove as much of the coarse soiling as possible. Shake can before use. Spray the seized parts (bolts) directly from a minimum distance and let it take effect for approx. 1-2 minutes. With stubborn parts, repeat the process.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!