Vernier callipers, digital
Digital vernier callipers Eco
CAL-DGT-(0-150MM)
Register now and access more than 125,000 products
- Measuring unit: Metric or inch, direct conversion
- LCD digital display 10 mm
- Data output RS 232 compatible
- Battery: 1.5 V silver oxide battery (SR44)
- Battery voltage monitor light on the display
- Automatic switch-off/5 min.
- Stainless steel, hardened and smoothed
- Measuring surfaces ground and lapped
- With locking screw
- Flat depth gauge
- Thread table on the reverse, depth gauge on the calliper
Delivered in plastic box.
Datasheets(X)
The callipers have two measuring arms on each side for measuring internal and external dimensions. The callipers also have a depth gauge that can be used e.g. for measuring bore holes. The callipers have a table on the reverse for looking up the diameter of core holes in thread cutting.
Last viewed
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
7-pin socket 12 V With cut-off contact for rear fog light
Support plate
Twist drill bit HSS DIN 338 TYPE RN
Screwdriver, slotted
PU COMPRESSED-AIR HOSE
Tool case Limited Edition 50 pieces
Tool rucksack with watertight base shell
Work vest
Silicone fluid silicone spray