Twist drill bit HSCo DIN 338 type RN oxide

Name: Twist drill bit HSCo DIN 338 type RN oxide
Brand: Würth
SKU: 0626000250

Twist drill bit HSCo DIN 338 type RN OXID
DRL-TWST-MET-DIN338-HSCO-OX-D2,5
ZEBRA

Art.-no. 0626000250

EAN 4053479244372

All versions

Specification

The precise, high-performance drill bit for machining stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also for general, broad applications in steel up to 1,200 N/mm² and in cast iron.

Fast drilling with optimal chip removal

Large chip areas and small core

Ideal for core holes

Very precise point geometry for precise drill holes

Product packaging made from 100 % PCR (recycled plastic from household waste) and 100 % recyclable

Notice

The dia. 13.0 mm drill shank has been reduced to dia. 12.7 mm.

Also recommended for use in conventional steel where a longer service life than that of uncoated HSS drill bits is a priority.

Technical information

Key
v_c = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

For dia. 12.5-20.0
Material designation	Tensile strength			from dia. 12.5			from dia. 16.0			from dia. 20.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	30	40	764	1019	0,200	597	796	0,250	477	637	0,315
Unalloyed quenched and tempered steels	≤ 850 N/mm²	30	40	764	1019	0,200	597	796	0,250	477	637	0,315
Low-alloy quenched and tempered steels	≤ 850 N/mm²	30	40	764	1019	0,200	597	796	0,250	477	637	0,315
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	28	35	713	891	0,160	557	696	0,200	446	557	0,250
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	28	35	713	891	0,160	557	696	0,200	446	557	0,250
Alloyed quenched and tempered steels	≤ 1,200 N/mm²	12	18	306	458	0,125	239	358	0,160	191	286	0,200
Nitriding steels	≤ 1,200 N/mm²	12	18	306	458	0,125	239	358	0,160	191	286	0,200
Tool steels	≤ 1,200 N/mm²	12	18	306	458	0,125	239	358	0,160	191	286	0,200
High-speed steels	≤ 1,200 N/mm²	12	18	306	458	0,125	239	358	0,160	191	286	0,200
Stainless steels
Stainless steels	≤ 1,200 N/mm²	10	14	255	357	0,125	199	279	0,160	159	223	0,200
Titanium	≤ 850 N/mm²	6	10	153	255	0,100	119	199	0,125	95	159	0,160
Hard materials
Spring steels	≤ 330 HB	12	18	306	458	0,125	239	358	0,160	191	286	0,200
Cast metals
Cast iron	≤ 350 HB	30	35	764	891	0,250	597	696	0,315	477	557	0,400
Spheroidal graphite and malleable iron	≤ 350 HB	26	30	662	764	0,250	517	597	0,315	414	477	0,400
Plastics
Plastics	≤ 200 N/mm²	20	30	509	764	0,200	398	597	0,250	318	477	0,315

Cutting values
For dia. 1.0-2.5
Material designation	Tensile strength			from dia. 1.0			from dia. 2.0			from dia. 2.5
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	30	40	9549	12732	0,016	4775	6366	0,050	3820	5093	0,063
Unalloyed quenched and tempered steels	≤ 850 N/mm²	30	40	9549	12732	0,016	4775	6366	0,050	3820	5093	0,063
Low-alloy quenched and tempered steels	≤ 850 N/mm²	30	40	9549	12732	0,016	4775	6366	0,050	3820	5093	0,063
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	28	35	8913	11141	0,014	4456	5570	0,040	3565	4456	0,050
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	28	35	8913	11141	0,014	4456	5570	0,040	3565	4456	0,050
Alloyed quenched and tempered steels	≤ 1,200 N/mm²	12	18	3820	5730	0,012	1910	2865	0,032	1528	2292	0,040
Nitriding steels	≤ 1,200 N/mm²	12	18	3820	5730	0,012	1910	2865	0,032	1528	2292	0,040
Tool steels	≤ 1,200 N/mm²	12	18	3820	5730	0,012	1910	2865	0,032	1528	2292	0,040
High-speed steels	≤ 1,200 N/mm²	12	18	3820	5730	0,012	1910	2865	0,032	1528	2292	0,040
Stainless steels
Stainless steels	≤ 1,200 N/mm²	10	14	3183	4456	0,012	1592	2228	0,032	1273	1783	0,040
Titanium	≤ 850 N/mm²	6	10	1910	3183	0,008	955	1592	0,025	764	1273	0,032
Hard materials
Spring steels	≤ 330 HB	12	18	3820	5730	0,012	1910	2865	0,032	1528	2292	0,040
Cast metals
Cast iron	≤ 350 HB	30	35	9549	11141	0,018	4775	5570	0,063	3820	4456	0,080
Spheroidal graphite and malleable iron	≤ 350 HB	26	30	8276	9549	0,018	4138	4775	0,063	3310	3820	0,080
Plastics
Plastics	≤ 200 N/mm²	20	30	6366	9549	0,016	3183	4775	0,050	2546	3820	0,063

For dia. 6.3-10.0
Material designation	Tensile strength			from dia. 6.3			from dia. 8.0			from dia. 10.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	30	40	1516	2021	0,125	1194	1592	0,160	955	1273	0,200
Unalloyed quenched and tempered steels	≤ 850 N/mm²	30	40	1516	2021	0,125	1194	1592	0,160	955	1273	0,200
Low-alloy quenched and tempered steels	≤ 850 N/mm²	30	40	1516	2021	0,125	1194	1592	0,160	955	1273	0,200
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	28	35	1415	1768	0,100	1114	1393	0,125	891	1114	0,160
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	28	35	1415	1768	0,100	1114	1393	0,125	891	1114	0,160
Alloyed quenched and tempered steels	≤ 1,200 N/mm²	12	18	606	909	0,080	477	716	0,100	382	573	0,125
Nitriding steels	≤ 1,200 N/mm²	12	18	606	909	0,080	477	716	0,100	382	573	0,125
Tool steels	≤ 1,200 N/mm²	12	18	606	909	0,080	477	716	0,100	382	573	0,125
High-speed steels	≤ 1,200 N/mm²	12	18	606	909	0,080	477	716	0,100	382	573	0,125
Stainless steels
Stainless steels	≤ 1,200 N/mm²	10	14	505	707	0,080	398	557	0,100	318	446	0,125
Titanium	≤ 850 N/mm²	6	10	303	505	0,063	239	398	0,080	191	318	0,100
Hard materials
Spring steels	≤ 330 HB	12	18	606	909	0,080	477	716	0,100	382	573	0,125
Cast metals
Cast iron	≤ 350 HB	30	35	1516	1768	0,160	1194	1393	0,200	955	1114	0,250
Spheroidal graphite and malleable iron	≤ 350 HB	26	30	1314	1516	0,160	1035	1194	0,200	828	955	0,250
Plastics
Plastics	≤ 200 N/mm²	20	30	1011	1516	0,125	796	1194	0,160	637	955	0,200

For dia. 3.15-5.0
Material designation	Tensile strength			from dia. 3.15			from dia. 4.0			from dia. 5.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	30	40	3032	4042	0,080	2387	3183	0,100	1910	2546	0,100
Unalloyed quenched and tempered steels	≤ 850 N/mm²	30	40	3032	4042	0,080	2387	3183	0,100	1910	2546	0,100
Low-alloy quenched and tempered steels	≤ 850 N/mm²	30	40	3032	4042	0,080	2387	3183	0,100	1910	2546	0,100
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	28	35	2829	3537	0,063	2228	2785	0,080	1783	2228	0,080
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	28	35	2829	3537	0,063	2228	2785	0,080	1783	2228	0,080
Alloyed quenched and tempered steels	≤ 1,200 N/mm²	12	18	1213	1819	0,050	955	1432	0,063	764	1146	0,063
Nitriding steels	≤ 1,200 N/mm²	12	18	1213	1819	0,050	955	1432	0,063	764	1146	0,063
Tool steels	≤ 1,200 N/mm²	12	18	1213	1819	0,050	955	1432	0,063	764	1146	0,063
High-speed steels	≤ 1,200 N/mm²	12	18	1213	1819	0,050	955	1432	0,063	764	1146	0,063
Stainless steels
Stainless steels	≤ 1,200 N/mm²	10	14	1011	1415	0,050	796	1114	0,063	637	891	0,063
Titanium	≤ 850 N/mm²	6	10	606	1011	0,040	477	796	0,050	382	637	0,050
Hard materials
Spring steels	≤ 330 HB	12	18	1213	1819	0,050	955	1432	0,063	764	1146	0,063
Cast metals
Cast iron	≤ 350 HB	30	35	3032	3537	0,100	2387	2785	0,125	1910	2228	0,125
Spheroidal graphite and malleable iron	≤ 350 HB	26	30	2627	3032	0,100	2069	2387	0,125	1655	1910	0,125
Plastics
Plastics	≤ 200 N/mm²	20	30	2021	3032	0,080	1592	2387	0,100	1273	1910	0,100

Documents

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Accessory

Additional accessory:

Product

Description

Quantity

Price
/PU

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

Multi cutting oil for light to medium machining work

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-CANISTER-5LTR

Art.-no. 08930501

Multi cutting oil for light to medium machining work

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).