TIME-SERT® threaded bushing
Insert nut Time-Sert
NUT-INRT-M7X1,0X14
TIME-SERT
Register now and access more than 125,000 products
Safe working, including on weak walls
Very thin-walled owing to synchronously running threads.
Can be used in thin-walled materials
Reliable repairs where only a few thread turns are available.
Impermeable to media
Pressure application with the workpiece makes the thread pressure-sealed for water, oil, other liquids and compressed gases.
Self-locking
Automatic shaping of not yet fully formed threads when screwing in. The nut is guaranteed not to twist out, even without bonding.
Accurate positioning in the workpiece
The nuts have a collar, no additional securing in the workpiece is necessary
Tear-out strength
Tear-out strength may vary subject to application (edge areas etc.) and material. As a result, no general information can be provided on this topic. Tests in the Würth laboratory have shown that the Time-Sert thread repairs are equivalent to the original threads in most cases.
Steel nuts
Material: 9SMn/Pb28K DIN1651/668
Coating: galvanised, passivated.
Datasheets(X)
Thread type x nominal diameter x pitch (My) | M7 x 1 |
Length (L) | 14 mm |
Design | Metric fine thread |
Surface | Zinc plated |
Material | Steel |
Last viewed
Lock washer DIN 127, steel, mechanically applied zinc coating
1/2 inch socket wrench insert, metric
Hexagon nut with clamping piece (all-metal) fine thread DIN 980, steel 10, zinc-plated yellow passivated (A2C)
Crimp cable lug, push connector PVC-insulated
TIME-SERT® threaded bushing
DUO-S impact drill bit with straight shank
HSS annular cutter
O-ring, metric
Allen key, hexagon socket with ball head Extra-long design
Glass socket bulb