Stone chip protection AQUA - GRVLGUA-AQUA-BLACK-1LTR

Stone chip protection AQUA

Name: Stone chip protection AQUA
Brand: Würth
SKU: 0892070100

Gravel guard AQUA
GRVLGUA-AQUA-BLACK-1LTR

Art.-no. 0892070100

EAN 4052703190867

All versions

Similar products

Prices for customers after login

Stone chip protection AQUA

Art.-no. 0892070100

Prices for customers after login

Quantity

x 12 pcs

Exclusively for trade customers

Login/Register
Call customer service: (061) 251 888

Climate-optimized, paintable, water-based stone chip protection.

Dries completely down to -10 °C

Fine and coarse structures can be sprayed depending on the application

Excellent anti-humming effect

Very high abrasion resistance

Suitable for oven drying

Very easy to sand once completely dry

Notice

Dries down to -10 °C. When painting, ambient influences must be taken into account. Do not spray on joints, engines, gears and brake systems. Dilution with water (max. 2 %) possible. With IR (infrared) drying, the following must be taken into account: Maximum drying time depends on the temperature, coat thickness, fresh air and air supply. The material must not be heated above max. 60 °C during IR drying, as blistering may occur

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For repairing and restoring the original texture and for protecting against stone chips and corrosion in all visible areas, e.g. front and rear bumpers, side members etc.

Instructions

Shake can well before use. The base material must be dry and free from rust, dirt and grease. Old coating compound should be removed. Can be painted over with all paint systems after approx. two hours (depending on the coat thickness), especially water-based paints. The optimum spraying distance is 20-30 cm. Spray a very thin coat for the first coat to provide improved adhesion and let it flash off for approx. three minutes. Then apply the required coat thickness. Allow each intermediate coat to flash off. Different textures are achieved by adjusting the compressed air and nozzle supply. Clean gun thoroughly using water after every use. Aqua gravel guard can be mixed with water-based paints to a proportion of up to 30 %. Dirty surfaces can be cleaned with water before drying fully. Once the product is completely dry, it can be painted over with commercially available 2-component acrylic paints and base coats. We recommend applying a primer before using 2-component acrylic paint. Operating pressure: 3-6 bar.

Chemical basis	Aqueous synthetic dispersions, fillers and additives
Contents	1 l
Weight of content	1.05 kg
Colour	Black
Max. processing temperature	25 °C
Min./max. processing temperature /conditions	-10 to 25 °C / at 20°C and 65% relative humidity
Conditions for through drying	at 20°C, 500 μ wet
Max. pressure	6 bar
Max. temperature conditions	35 °C
Min./max. temperature conditions	15 to 35 °C
Min. pressure	3 bar
Min./max. spraying distance	20-30 cm
Can be varnished after	12 h
Conditions for drying time	at 20°C and 65% relative humidity
Density/conditions	1.05 kg/l / at 20°C, DIN 51757
Min./max. temperature resistance	-25 to 80 °C
Shelf life from production/conditions	12 Month / at 10°C to 30°C
Conditions to maintain shelf life from production	at 10°C to 30°C

Required accessory:

Product

Description

Quantity

Price
/PU

UBSSPRGUN-R1/4IN-BOTTLE-1LTR

Art.-no. 08911063

For applying stone chip and underseal products containing solvents.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).