Self-tapping thread insert with cutting slot
Thread insert with cutting slot steel zinc plated
THRINRT-SLFCUT-THWL-M16X1,5
Register now and access more than 125,000 products
- For producing high-strength screw connections and other threaded connections in materials with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- The inserts are simply screwed into a pre-drilled or pre-cast hole
- Cutting effect due to sharp edges and interrupted threads of the male thread
- The front threads are bevelled for easier cutting and insertion
- The cutting slot keeps the thread inserts anchored even during strong vibrations or shaking of the workpiece.
- Chrome(VI)-free zinc thick film passivation for good corrosion protection (corrosion resistance in salt spray test according to DIN EN ISO 9227-NSS (h): 72h white rust/120 red rust)
Datasheets(X)
- Applications in the entire metal and plastic processing industry
- Thread reinforcement on tools with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- For repairing torn-out threads
- Usual applications:
- For light metals and metals with a strength up to approx. 400 N/mm²
- For cast iron with hardness up to approx. 220 HB
- Plastic and fibreglass-reinforced plastic
(Tests on the original component are recommended, particularly near edges.)
 | |
Material | Steel / acetate |
Surface | Plain |
Length (L) | 24 mm |
Outer diameter x pitch (D) | 16.5mm |
Min./max. drill hole diameter | 16.32-16.56 mm |
Last viewed
Tungsten carbide bur with MX teeth
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Malleable iron screw clamp with protective caps
Pre-charged NiMH battery
Safety goggles, Ergo Foam
Rubber seal for 12 V 7-pin sockets
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Self-tapping thread insert with cutting slot
Synthetic corundum vulcanised fibre disc
Cordless LED torch 3 in 1