Sealant remover
SEALREM-300ML
Register now and access more than 125,000 products
- For quick and easy removal of stubborn residues
- Reliably loosens seals, seal residues and hardened adhesives
- Effectively removes oils, greases, resins, tar, paints and varnishes
- High adhesion for effective application even on vertical surfaces
- Simplifies cleaning and reduces the amount of work required
- Minimises machining
- Carefully mask off any painted surfaces and protect from the spray mist.
- Always test compatibility with the material in an inconspicuous area before use.
- Not suitable for sensitive plastics, PVC or synthetic materials.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Wide range of uses on metal, wood, glass, ceramic, polyethylene and polypropylene.
- Shake the can thoroughly before use.
- Spray the surface to be treated evenly and allow to take effect for 5-10 minutes.
- Then, remove any loosened residues using a suitable tool.
Contents | 300 ml |
Smell/fragrance | Alcohol |
Colour | Light yellow |
Chemical basis | Mix of organic solvents |
pH value | 10.6-11.0 |
Density/conditions | 0.79 g/cm³ / at 20°C |
Shelf life from production | 24 Month |
AOX-free | Yes |
Silicone-free | Yes |
Last viewed
1/2 inch socket wrench insert metric, hexagon, short
Blade connector uninsulated
Clay series cleaning sponge
CUT+COOL drilling and cutting oil
Medium-strength screw retainer
Inner plastic roller with ribbed, non-porous surface
Non-Slip Tape
Thin-walled heat-shrink hose shrink rate 2:1 without internal adhesive
Twist drill bit HSCo DIN 338 type RN oxide
Vacuum brake bleeder set, 20 pcs