Road marker

Name: Road marker
Brand: Würth
SKU: 0893199206

Road marker
ROADMRK-NEON PINK-600ML

Art.-no. 0893199206

EAN 4058794035711

All versions

Individual price display after login

Road marker

Art.-no. 0893199206

Individual price display after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: (061) 251 888

Marking spray with safety closure for highlighting road damage and construction sites

Safety cap for clean application

The colour cannot accidentally escape

Fingers are protected from paint mist and splashes

Fine and precise colour jet, ideal for writing

Excellent adhesion to absorbent, non-absorbent and slightly moist surfaces.

Weather-resistant and frost-proof, usable and resistant even in damp and cold weather (down to -18°C)

High-quality pigmentation for excellent luminosity and opacity (clearly visible from a long distance)

Quick drying time

High abrasion resistance

Notice

Fresh soiling can be removed with thinner. Hardened marking paint can be removed with a high-pressure cleaner and a brush. The shelf life is 2 years.

Do not expose to temperatures above 50°C.

Protect from sunlight and other sources of heat and ignition.

As with all other storage and handling procedures, it is especially advisable not to smoke.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For temporary (up to 2-3 months) marking and labelling of paths and driving routes, road damage as well as the course of pipes and lines in the construction and surveying field. Can be used on tarmac, concrete, wood, stone, glass, metal etc. Good adhesion to absorbent, non-absorbent and slightly damp surfaces.

Instructions

Shake the spray can well upside down before using to ensure good mixing of the colour (the mixing balls should be heard). After use, spray the valve until empty (until only propellant comes out) to clean valve and diffuser. Can be applied to any type of surface, including damp surfaces. We recommend a spraying distance of approx. 10 cm to the surface to be marked for accurate and clear markings.

Contents	600 ml
Colour	Neon pink

Suitable glove:

Product

Description

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.