Rivet nut with small countersunk head Zinc-plated steel, blue passivated
NUT-RIV-CS-(A2B)-(0,5-3,0)-16X10,4-M8
Art.-no. 091780
EAN 4046778982854
Register now and access more than 125,000 products
- Rivet nuts can be used as riveted and screwed connections. As a result, they offer both secure connections and the ability to easily mount additional components using conventional screws.
- Installation from one side, therefore also suitable for closed profiles.
- Simple, fast and mostly automatic installation.
- No countersinking of drill holes required.
- Consistently high installation quality.
- Anti-rotation connection with load-bearing thread.
- Improved cost-efficiency thanks to faster installation, secure connections and improved quality.
The specified extraction values are guideline values, and the information may vary for this reason, depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
Especially suitable for achieving high turning resistance in soft materials, such as aluminium, wood, plastic etc.
 | |
Thread type x nominal diameter (D) | M8 |
Head diameter (d1) | 11.5 mm |
Outer diameter (d2) | 10.4 mm |
Length (l1) | 16 mm |
Head height (k1) | 0.60 mm |
Min./max. grip range (s1) | 0.5-3.0 mm |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Tensile fracture load | 22000 N |
Shear-fracture load | 5200 N |
Max. tightening torque | 25 Nm |
Drill hole diameter | 10.5 mm |
Head type | Small countersunk head |
Last viewed
Basic UV leak detection additive
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Ratchet combination wrench Multi-profile for five screw head drives
EBS spiral wire 7-pin 24V for brake systems
Self-tapping thread insert with cutting slot
Tool bag with plastic base
Multi-point housing For blade connector 6.3 x 0.8 mm
Cable tie KBL 1 made of polyamide with plastic tongue
Circlips for bores assortment
Thin-walled heat-shrink hose shrink rate 2:1 without internal adhesive