Pneumatic pistol screwdriver DPS 1/4''
Pnmtc. pistol screwdriver DPS, 1/4-inch, standard
PISTSCRDRIV-PN-DPS1/4IN-HEX-NPT
Register now and access more than 125,000 products
Fast and tool-free bit replacement
1/4 inch quick-action chuck for bit
Precise torque control
Thanks to adjustable sliding clutch
Inserts and extracts
Right/left rotation changeover
No exhaust air in the working area
Exhaust air conducted to the rear with exhaust air system connection
- Use only bits or bit holders with 1/4" E 6.3 mount
- When used regularly, the machine should be lightly oiled via the compressed air supply every day. The use of a mist oiler is recommended.
- Plug-in nipple not included in scope of delivery
Datasheets(X)
Ideal tool for general repair, wood applications.
Tool holding device | 1/4-inch hexagon socket |
Type | adjustable clutch |
Rotation speed | 1800 rpm |
Min./max. torque | 2.2-10 Nm |
Operating pressure | 90 psi |
Length | 177.8 mm |
Air consumption | 113 l/min |
Min. hose inner diameter | 3/8 in |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert)
1/2" socket wrench insert For TX screws, short
Tungsten carbide bur with MX teeth
Multi-fibre structural adhesive reinforced with fibreglass
Electrical insulating tape
Blade connector Uninsulated
Clay series cleaning cloth
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Synthetic corundum vulcanised fibre disc