Neutral silicone

Name: Neutral silicone
Brand: Würth
SKU: 08925301

Neutral silicone, coloured
SILSEAL-NEUT-CLEAR-310ML

Art.-no. 08925301

EAN 4045727801970

All versions

Prices for customers after login

Neutral silicone

Art.-no. 08925301

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: (061) 251 888

For floor and wall joints subject to medium stresses

Adhesion to all building-related surfaces

Does not cause corrosion on metals

Resistant to ageing, weathering and UV

Permanently elastic

Can be painted

Building material class B2 in accordance with DIN 4102

Notice

Not suitable for bonding or filling cavities

Complies with building material class B2 in accordance with DIN 4102

Due to the large number of varnish and glazing formulations, always carry out your own tests on the area first, especially on alkyd resin paints and powder-coated aluminium

When hardening, gives off an odour typical of silicone. This odour is no longer present once the curing process is complete. With larger joint dimensions, the silicone-like odour may be present for longer.

Silicone has a tendency to yellow in dark areas where there is no UV exposure

Avoid contact with VKP tape

Tested in accordance with EN 15651 Part 1 INT

Fire behaviour: Class E

Stability under load: < 3 mm

Volume loss: < 20%

Adhesion/expansion under pre-stress after immersion in water: Passed

Adhesion/expansion at different temperatures: Passed

Adhesion/expansion after exposure to heat, water and artificial light: Passed

Tensile behaviour: Breaking elongation at 23°C: > 25%

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Sealing of indoor expansion joints with medium loads.

Instructions

The surface must be load-bearing, clean, dry and free from grease, rust and water

Do not use in heavy rain

The joint dimensions must be observed. Prime the joints with PE back-fill material

A primer, e.g. with Silicone primer, improves the adhesion for absorbent or porous surfaces.

Please observe the "General Notes on Application for Sealants" and "Construction Material Compatibility of Würth Sealants" overview sheet. Further information in the technical data sheet.

Container	Cartridge
Contents	310 ml
Chemical basis	Neutral crosslinked silicones, oxime-based
Fungicidal properties	Yes
Colour	Transparent
Min. skin-formation time	20 min
Ultraviolet resistance	Yes
Continuous motion absorption	12.5 %
Density	0.97 g/cm³
Smell/fragrance	Characteristic
Min./max. skin-formation time /conditions	20-8 min min / at 23°C and 50% relative humidity
Full curing speed/conditions	2 mm/d / 23°C and 50% relative humidity
Shelf life from production	12 Month
Min./max. processing temperature	5 to 40 °C
Min./max. temperature resistance	-40 to 150 °C
Coating compatibility	Yes
Recoatable/Can be painted over	No
Shore A hardness	15
Min. breaking elongation	300 %
Breaking elongation conditions	for 2-mm film
Building material class	B2 - Normally inflammable

Required accessory:

Product

Description

Quantity

Price
/PU

MANCLKGGUN-CART-MET-310ML

Art.-no. 0891001

Simple design, semi-open, made of sheet steel with riveted struts

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.