Welcome to Würth Namibia For trade customers only

Lubricating grease WGF 130

Lubricating grease WGF 130
GRSE-ROLLBEAR-HIGHPERFORMANCE-WGF130-1KG

Art.-no. 0893530
EAN 4011231892001
Prices for customers after login
Lubricating grease WGF 130

Art.-no. 0893530

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

High-performance lubricating grease
  • Lithium-soap grease with molybdenum sulphide (MoS2)

  • Forms a solid lubricating film on the running surfaces under load from the grease itself

  • Significantly improves run-in conditions

  • Ensures additional emergency running lubrication

  • Reduces friction and thus prevents excessive wear

  • Extends lubricating period

  • Protects against corrosion

  • Resistant to water

  • Temperature resistant from -30°C to +130°C, briefly up to +150°C

  • Colour: Black

  • Consistency as per NLGI: 2

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

High-performance grease for lubricating roller and slide bearings of all kinds.

Instructions

Clean and degrease the lubricating points. Then apply the grease to the desired layer thickness.

Chemical basis

Lithium 12 hydroxystearate

Oil basis

Mineral oil

Colour

Black

Density

1 g/cm³

Smell/fragrance

Oil

Min. dripping point

180 °C

Min. temperature conditions

-30 °C

Max. temperature resistance

130 °C

Min. temperature resistance

-30 °C

Max. temperature conditions

150 °C

Max. short-term temperature resistance

150 °C

Kinematic oil basis viscosity

280 cSt

Behaviour in the presence of water

1-90

Conditions for behaviour in the presence of water

in accordance with DIN 51807-1

NLGI grade

2

Worked penetration

265 to 295 x 0.1 mm

Worked penetration conditions

in accordance with DIN ISO 2137

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

Resistance against

Water

Contents

1 l

Weight of content

1000 g

Shelf life from production

36 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 2
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information