Welcome to Würth Namibia For trade customers only

Lead-free bodywork tinning paste

Bodywork tinning paste, lead-free
TINGPAST-BODY-LEADFREE-CAN-1KG

Art.-no. 098290
EAN 4046778655222
Prices for customers after login
Lead-free bodywork tinning paste

Art.-no. 098290

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Lead-free, high-quality S-Sn97Cu3 tinning paste. Flux type in accordance with DIN EN 29454-1.
  • Melting range: 230–250°C

  • Complies with the legal specifications of European Parliament Directive 2000/53/EC and the German national used vehicle law

  • Tin content 60–70%, lead-free
Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Lead-free, high-quality S-Sn97Cu3 tinning paste. Flux type in accordance with DIN EN 29454-1. Ideally suited for soft soldering, tinning and pre-tinning when repairing bodywork on passenger cars, lorries, agricultural and construction machinery

Instructions

The area to be repaired must be bare metal free from rust and grease prior to application. Apply a thin coat of paste and heat with a flame. Then wipe the soldering point using a clean, lint-free cloth.

Weight of content

1 kg

Material designation

S-Sn97Cu3

Smell/fragrance

Characteristic

Colour

Light grey

Max. melting temperature

250 °C

Min. melting temperature

230 °C

Sn composition of the brazing solder (weight-%)

65 %

pH value

Acidic

Conditions for pH value

at 20°C

Unleaded

Yes

Boiling point

100 °C

EN standard

29454-1

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information