LMS-Fluid foodstuffs lubricant
Foodstuffs lubricant LMS-Fluid
LUB-FDGRD-(LMS FLUID)-400ML
Register now and access more than 125,000 products
Viscous, colourless special lubricant
- Reduces wear and friction
- Excellent protection against corrosion
Precise application
- Optimum, precise lubrication at defined lubricating points
- Economical and efficient to use
Tasteless and odourless
AOX and silicone-free
The product may come into contact with foodstuffs for technical reasons.
1 NSF = internationally recognised organisation for the supervision and registration of products used in the food industry.
NSF H1 registered (no.: 135923), meets the requirements of H1, 1998.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Datasheets(X)
Chemical basis | Medical white according to DAB 10 |
Lubricant system | Oil |
Colour | Colourless |
Smell/fragrance | Neutral |
Density | 0.86 g/cm³ |
Density conditions | at 20°C |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 145 °C |
Min. flashing point | 245 °C |
Kinematic oil basis viscosity | 70 mm²/s |
Conditions for viscosity of oil basis | at 40°C |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
AOX-free | Yes |
Resistance against | Water, Salt water, Acid, Lye |
Contents | 400 ml |
Weight of content | 344 g |
Container | Can |
Shelf life from production | 12 Month |
Last viewed
Contact spray
1/2 inch socket wrench insert metric, hexagon, short
1/4" multi-socket wrench insert bi-hex, multi profile
Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204
Plastic multi-purpose Zebra Shark® anchor without collar
Plastic expanding rivet without cap, with multiple slits
Sealing stoppers Deutsch DT series
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Injector-Ex injector solvent
Metric combination wrench with POWERDRIV®