Welcome to Würth Namibia For trade customers only

Joint seal WÜTOP® Flex-Plus

Connector seal, WÜTOP Flex-Plus
CONSEAL-ALU-(FLEX-PLUS)-GREY-280MM
WUETOP

Art.-no. 0681018045
EAN 4066443055614
Prices for customers after login
Joint seal WÜTOP® Flex-Plus

Art.-no. 0681018045

Prices for customers after login
Quantity
PU
x 1 m

Exclusively for trade customers

Register now and access more than 125,000 products

One-sided, self-adhesive, profiled aluminium roll for durable and secure sealing of typical roof junctions. Due to the special embossing, WÜTOP Flex-Plus can be perfectly adapted to all shapes and curvatures.

Ideal alternative to sheet metal and lead flashing



Material adapts perfectly to roof surface:


The embossed surface structure allows it to be optimally moulded to the roof and easily bent in any direction



No harmful heavy metals such as lead



UV and weather-resistant



Paint-coated surface allows optimum adaptation to the respective tile



Permanently elastic, temperature-resistant butyl adhesive with high adhesive strength on almost all substrates



Rounded edges prevent hand injuries

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions

Cut WÜTOP® Flex-Plus to the required length using scissors. Roughly fit the material to the shape of the roof and pull the cover film off the adhesive coating on the back. Firmly press onto the tiles and smooth down into the trough. WÜTOP® Flex-Plus can also be overlapped. Ensure that overlapping sections are adhered and pressed down very carefully, especially in corner areas. We recommend using a rubberised pressure roller for pressing down the product. If WÜTOP® Flex-Plus is run up onto building components (e.g. chimneys), the upper edge must be fitted with a conventional cap strip and sealed with a permanently elastic sealant.



To ensure good, lasting adhesion, note the following:


  • Only use in temperatures from +5°C

  • The substrate must be clean and dry and free of dust and grease

  • WÜTOP® Flex-Plus must be accurately adjusted to the contour of the substrate and pressed down firmly

  • Conduct your own adhesion tests on tiles with silicone coatings

Colour

Grey

Length of roll

5 m

Roll width

280 mm

Length

10 m

Number of rolls

2 PCS

Min. processing temperature

5 °C

Material thickness

120 µm

Ultraviolet resistance

Yes

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information