Joint seal WÜTOP® Flex-Plus
Connector seal, WÜTOP Flex-Plus
CONSEAL-ALU-(FLEX-PLUS)-BROWN-280MM
Register now and access more than 125,000 products
Ideal alternative to sheet metal and lead flashing
Material adapts perfectly to roof surface:
The embossed surface structure allows it to be optimally moulded to the roof and easily bent in any direction
No harmful heavy metals such as lead
UV and weather-resistant
Paint-coated surface allows optimum adaptation to the respective tile
Permanently elastic, temperature-resistant butyl adhesive with high adhesive strength on almost all substrates
Rounded edges prevent hand injuries
Datasheets(X)
Cut WÜTOP® Flex-Plus to the required length using scissors. Roughly fit the material to the shape of the roof and pull the cover film off the adhesive coating on the back. Firmly press onto the tiles and smooth down into the trough. WÜTOP® Flex-Plus can also be overlapped. Ensure that overlapping sections are adhered and pressed down very carefully, especially in corner areas. We recommend using a rubberised pressure roller for pressing down the product. If WÜTOP® Flex-Plus is run up onto building components (e.g. chimneys), the upper edge must be fitted with a conventional cap strip and sealed with a permanently elastic sealant.
To ensure good, lasting adhesion, note the following:
- Only use in temperatures from +5°C
- The substrate must be clean and dry and free of dust and grease
- WÜTOP® Flex-Plus must be accurately adjusted to the contour of the substrate and pressed down firmly
- Conduct your own adhesion tests on tiles with silicone coatings
Colour | Brown |
Length of roll | 5 m |
Roll width | 280 mm |
Length | 10 m |
Number of rolls | 2 PCS |
Min. processing temperature | 5 °C |
Material thickness | 120 µm |
Ultraviolet resistance | Yes |
Last viewed
Self-tapping thread insert with cutting slot
Twist drill bit HSS DIN 338 type RN 130°
Drilling and cutting foam CUT+COOL
C 6.3 TX bit (1/4 inch)
Combination wrench, angled
Twist drill bit HSS DIN 338 type RN 130°
Body Sealing Plugs
Screw seal, self-centring
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
HSCo precision twist wood drill bit For hardwood, wood and plastics