HT brake protection - BRKPAST-PROTECTION-HT-SPR-300ML

HT brake protection

Name: HT brake protection
Brand: Würth
SKU: 0893816

Brakes protection spray HT
BRKPAST-PROTECTION-HT-SPR-300ML

Art.-no. 0893816

EAN 4053479338866

All versions

Similar products

Prices for customers after login

HT brake protection

Art.-no. 0893816

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: (061) 251 888

Lubricating, separating and anti-corrosive paste extremely resistant to high temperatures and high pressures

Metal-free

Does not harm sensors on brake systems

Suitable for ABS brake systems and ASR and ESP systems

Heat-resistant up to 1400°C

Permanent and high level of lubrication thanks to ceramic components

Resistant to diluted acids, bases, spray water and salt water

Silicone- and AOX-free

Resistant to high pressures

Notice

Do not apply to brake discs and brake friction lining

Shake the aerosol thoroughly

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Lubricating, separating and anti-corrosive paste for parts in vehicle brake systems, installation aid on machines etc.

For preventing run-in damage and wear on bearings, sliding points, screw and plug connections.

Additive article:

Product

Description

Quantity

Price
/PU

BRKCLNR-500ML

Art.-no. 08901087

For cleaning and degreasing during maintenance and repair work

BRKCLNR-5LTR

Art.-no. 0890108715

For cleaning and degreasing during maintenance and repair work

x 1 pcs

BRKCLNR-20LTR

Art.-no. 0890108716

For cleaning and degreasing during maintenance and repair work

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.