Diamond cutting disc, concrete
CUTDISC-DIA-COMBI-DIAMOND-BLADE-350MM
Art.-no. 0666350000
EAN 4099618394591
Register now and access more than 125,000 products
Higher cutting performance
Fan segments for better dissipation of heat and removal of dust in comparison with conventional segments.
Datasheets(X)
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs — risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Versatility (points system) | 4 of 4 points |
Cutting speed (point system) | 4 of 4 points |
Cut quality (point system) | 4 of 4 points |
Diameter (Ø) | 350 mm |
Cutting width | 3 |
Bore hole | 25.4 mm |
Reducing-ring internal diameter | 25.4 mm |
Segment height | 15 mm |
Segment height 2 | 15 mm |
Segment thickness | 3 mm |
Number of segments | 23 PCS |
Number of segments 2 | 23 PCS |
Total number of segments | 23 + 23 PCS |
Max. rotation speed | 8000 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Workshop trolley assortment 8.4 PLUS 242 pieces REDSTRIPE
Countersink with depth stop
1-ear clamp with insert ring
Electrode manual welding inverter EWI 200S
Cutting wheel for pipe cutter
C 6.3 PZ bit (1/4 inch)
Xenon double-flash beacon With 3-way mounting
Plier wrench
Brake pipe nipple, type E
Blind rivet, round pan head Open end