DP 300 engine and housing sealing compound

Name: DP 300 engine and housing sealing compound
Brand: Würth
SKU: 0890100048

Engine and housing sealing compound DP 300 NSF
ENGSEALCOMPD-DP300-TUBE-RED-80ML

Art.-no. 0890100048

EAN 4050641041708

All versions

Prices for customers after login

DP 300 engine and housing sealing compound

Art.-no. 0890100048

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: (061) 251 888

Permanently plastic engine and housing sealing compounds with high degree of temperature resistance

Excellent sealing ability thanks to permanently plastic (non-hardening) properties

Resistance to vibration guaranteed even after years of exposure

No pulling of threads during application

Does not run on vertical or downward-sloping surfaces

Temperature-resistant from -50°C to +270°C; for brief periods up to +300°C

Poor thermal conductivity

Does not bond to metals or other materials chemically, prevents atmospheric corrosion

Resistant to water, air, gasoline, kerosene, a variety of oils, synthetic lubricants, water/glycol and methanol mixtures, anti-freeze, fluorocarbon cooling agents

Silicone-free

Non-toxic

Notice

Can only be used together with solid seal

Not suitable for sealing oil sumps

NSF registered, category P1, reg. no. 151822

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For sealing engines and housings in the automotive and motorcycle industry, tractor construction, electrical industry, turbine and nuclear power plants, mechanical engineering, gear construction, food industry, in gas, water and electricity plants, pump construction and mining

For sealing particularly demanding and critical sealing connections due to its excellent thermal, mechanical and chemical resistance

Approved by almost all well-known automotive manufacturers as well as by the Federal Office of Defence Technology and Procurement

Instructions

The surfaces must be clean, dry and free from grease

Further information in the technical data sheet

Weight of content	89.6 g
Chemical basis	Polyurethane
Colour	Red
Density/conditions	1.12 g/cm³ / at 25°C
Min./max. temperature resistance	-50 to 270 °C
Min. flashing point	-5 °C
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.