Clay series cleaning glove
Cleaning glove Clay series
CLNGLOV-HALF-L210-W140MM
Register now and access more than 125,000 products
- Easily removes stubborn residues and stains from painted surfaces that cannot be removed by conventional cleaning, producing a mirror-like finish.
- Especially gentle cleaning owing to very low heat development and by excluding aggressive cleaning agents.
- Washable and reusable
- Considerable time, energy and cost savings
- Very easy to apply
Never use the Clay cleaning glove dry.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For fast and effortless removal of paint spray mist, resin, tar and insect remains, especially in the detailing of new and used vehicles. Painted surfaces, glass, chrome, etc.
Rinse the area to be cleaned and the cleaning glove thoroughly with water or PH neutral car shampoo (we recommend highly diluted R1 cleaner Art. 0893125005). Then use the cleaning glove on the damp surface without applying pressure. The surface and the cleaning glove must always be damp when cleaning with the cleaning glove. We recommend moistening the surface and the cleaning glove with a pressure sprayer as required during the cleaning process. After completing the cleaning process, simply remove any residue with a microfibre cloth. The surface is perfectly prepared for polishing or sealing.
Colour | Black, Red |
Length x width | 210 x 140 mm |
Last viewed
Contact spray
Cordless drill driver ABS 12 COMPACT M-CUBE
Fork joints with split pin DIN 71751, with cotter bolts, zinc-plated, blue passivated (A2K)
Allen key, hexagon socket with ball head Extra-long design
Double flaring tool for trucks for D-E-F flanges in accordance with DIN 74234
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Laser range finder WDM 3-19
Hand tap, taper tap HSS DIN 352
Multi-point housing For flat plug-in sleeve 6.3 x 0.8 mm
Twist drill bit HSS DIN 338 TYPE RN