Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 1

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 2

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 3

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 4

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 5

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 6

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 7

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 8

Chemical injection mortar PURE EPOXY WIT-PE 1000 - ANC-MORT-(WIT-PE1000)-SBSCART-585ML - 9

Chemical injection mortar PURE EPOXY WIT-PE 1000

Name: Chemical injection mortar PURE EPOXY WIT-PE 1000
Brand: Würth
SKU: 5918605585

Chemical injection mortar WIT-PE 1000
ANC-MORT-(WIT-PE1000)-SBSCART-585ML

Art.-no. 5918605585

EAN 4062856204809

All versions

Similar products

Prices for customers after login

Chemical injection mortar PURE EPOXY WIT-PE 1000

Art.-no. 5918605585

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: (061) 251 888

Pure epoxy mortar with a long processing time, ideal for large anchoring depths and drilling holes as well as high temperatures. For bonded anchor, concrete and post-installed rebar connection with subsequent mortaring (REBAR)

Two-component reactive resin mortar, pure epoxy

Individual fixing point in cracked and uncracked concrete, seismic performance category C1 (M8 to M30) and C2 (M12 to M30): Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG

Areas subject to the German Federal Water Act (Wasserhaushaltsgesetz - WHG): Würth WIT-PE 1000 injection system (bonded anchor), anchorage in coated concrete surfaces in SFH facilities

Post-installed rebar connection

Anchoring of threaded rods in natural stone (without approval/assessment)

Proof of Performance

European Technical Assessment ETA-19/0542: Individual fixing point + cracked and uncracked concrete (anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG), seismic performance category C1 (M8 to M30) and C2 (M12 to M30)

European Technical Assessment ETA-19/0543: Post-installed rebar connection (REBAR)

European Technical Assessment ETA-23/0421: Post-installed rebar connection with improved bond and splitting failure when subjected to static action

General type approval Z-74.8-219: "WIT-PE 1000 injection system for concrete" fastening system for use in coated concrete surfaces in SFH facilities (anchorage in sealing surfaces subject to the German Federal Water Act)

General type approval Z-21.8-2156: Post-installed rebar connection subject to fatigue-inducing action

EPD: Environmental product declaration in accordance with ISO 14025 and EN 15804+A2, EPD-AWU-20230504-CBA4

Leak test, 7 bar water pressure: MFPA Leipzig GmbH, test report no. PB 5.1/20-424-2

Fire resistance when exposed to fire in accordance with DIN EN 1363-1: Cracked and uncracked concrete, Ingenieurbüro Thiele Tragwerksplanung GmbH

Application area

REBAR

Instructions

Create the drill hole

Make the drill hole using Würth hollow drill bit, there is no need for hole cleaning

Clean the drill hole:

Blow out 2x with oil-free compressed air (min. 6 bar)/brush out 2x/blow out 2x with oil-free compressed air (min. 6 bar)

Cut anchor rod to length and mark the desired insertion depths

Use WITVL 16 cut off mixer at position "X"

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Fill injection mortar starting from base of drill hole

Press in anchor rod up to drill hole base while turning slightly

Visual check of mortar volume, embedment depth mark

Load can be applied to the reinforcement bar after observing the curing time

Install component, apply installation torque

Create the drill hole

Make the drill hole using Würth hollow drill bit, there is no need for hole cleaning

Clean the drill hole:

Blow out 2x with oil-free compressed air (min. 6 bar)/brush out 2x/blow out 2x with oil-free compressed air (min. 6 bar)

Place the embedment depth mark on the rod and check the drilling hole depth

Use WIT-VL 16 Cut off mixer at position "X"

Use WITVL 16 cut off mixer at position "X"

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Mount injection equipment, fill composite mortar from bottom of drill hole

Insert the reinforcement bar until it reaches the mark, turning slightly

Visual check of the mortar volume, observe maximum processing time

Load can be applied to the reinforcement bar after observing the curing time

European Technical Assessment ETA-19/0542: Individual fixing point + cracked and uncracked concrete (anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG), seismic performance category C1 (M8 to M30) and C2 (M12 to M30)

European Technical Assessment ETA-19/0543: Post-installed rebar connection (REBAR)

European Technical Assessment ETA-23/0421: Post-installed rebar connection with improved bond and splitting failure when subjected to static action

General type approval Z-74.8-219: "WIT-PE 1000 injection system for concrete" fastening system for use in coated concrete surfaces in SFH facilities (anchorage in sealing surfaces subject to the German Federal Water Act)

General type approval Z-21.8-2156: Post-installed rebar connection subject to fatigue-inducing action

EPD: Environmental product declaration in accordance with ISO 14025 and EN 15804+A2, EPD-AWU-20230504-CBA4

Leak test, 7 bar water pressure: MFPA Leipzig GmbH, test report no. PB 5.1/20-424-2

Fire resistance when exposed to fire in accordance with DIN EN 1363-1: Cracked and uncracked concrete, Ingenieurbüro Thiele Tragwerksplanung GmbH

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

Suitable for attaching metal structures, metal profiles, wooden structures, brackets etc.

Suitable for structural expansions, ceiling and wall attachments, expansion of load-bearing structures, reinforcement of load-bearing structures, attachment of balconies and canopies, sealing of temporary openings and "forgotten" reinforcement bars


Type description	WIT-PE 1000
Container	Cartridge
Contents	585 ml
Suitable application gun	Battery-powered application gun 585ml, Application gun MULTI, Pneumatic application gun 585ml, HandyMax 585 ml
Min./max. processing temperature /conditions	0 to 40 °C / temperature in the anchorage ground during processing and hardening
Min./max. ambient temperature / Conditions	-40 to 72 °C / after completely curing process
Temperature resistance, long-term temperatures max.	24 °C
Temperature resistance, short-term temperatures max.	72 °C
Shelf life from production/conditions	24 Month / cool and dry storage area, 5°C to 25°C
Approval	ETA-19/0542, ETA-19/0543
Chemical basis	Pure-Epoxy, styrene free
Colour	Grey

Additional accessory:

Product

Description

Quantity

Price
/PU

APPLGUN-F.DWL-(WIT-MULTI)

Art.-no. 0891003105

For application of virtually all WIT cartridges and silicone cartridges

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).