1/4-inch torque wrench
Torque wrench 4 - 20 Nm
TRQWRNCH-RTCH-1/4IN-(4-20NM)
Register now and access more than 125,000 products
- Accuracy of ± 3% to the set value, to ISO 6789:2003
- Simple and precise setting by turning the handle
- With fine-toothed ratchet head (72 teeth) for working in the tightest places
- Scaling in Nm and also in pound force per square foot
- Acoustic and tangible torque triggering prevents over-tightening of bolts
- After use, relax spring and set to lowest value
- With calibration certificate
- After use, relax spring and set to lowest value.
- Torque wrenches are precision tools that must be checked at regular intervals with suitable measuring equipment and adjusted if necessary. We recommend annual calibration by our Master Service.
Datasheets(X)
 | |
External drive | 0 - not applicable |
Tip size | 1/4 inch |
Min./max. torque measuring range | 4-20 Nm |
Min./max. torque measuring range (inches) | 40-180 lbf.in |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | No |
Scale value torque | 1 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 220 mm |
Length of lever (L2) | 205 mm |
Ratchet head height (B1) | 17 mm |
Ratchet head height with square (B2) | 25 mm |
Handle diameter (D1) | 40 mm |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Screw seal, self-centring
1-ear clamp with insert ring
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Quick-release service coupling
Washing brush, 150 x 250 mm
Tungsten carbide bur with MX teeth
1/2 inch socket wrench insert metric, hexagon, short
Dichtfix sealant
Hand-held riveting device without pin and sleeve