Welcome to Würth Namibia For trade customers only

HHS® Clean adhesive lubricant pre-cleaner

Adhesive lubricant, pre-cleaner, HHS Clean
PRECLNR-(HHS CLEAN)-500ML
HHS

Art.-no. 089310610
EAN 4045727105092
Prices for customers after login
HHS® Clean adhesive lubricant pre-cleaner

Art.-no. 089310610

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Highly effective pre-cleaner + adhesion promoter (primer function) specifically matched to HHS products

Good cleaning performance


  • Quick and effective

  • Easily removes the most stubborn soiling


Primer function


  • Improves adhesion of lubricant

  • Extends lubrication intervals

  • Saves time and money


Short flash-off time


  • Short downtimes for treated parts

  • No second application required


Good material compatibility with various surfaces


  • Extremely wide application range

  • Seals do not swell


Spray head with direct jet


Targeted and precise cleaning of dirty parts



Acetone-free, AOX-free and silicone-free

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Highly effective pre-cleaner and bond improver (primer) specially tailored to HHS products.

Instructions

Spraying dirt with HHS Clean directly or in specific areas will remove the dirt without further treatment.

Contents

500 ml

Oil basis

Mineral oil

Colour

Colourless
Clear

Smell/fragrance

Characteristic

Density

0.76 g/cm³

Density conditions

at 20°C

pH value

8

Min. processing temperature

5 °C

Max. processing temperature

40 °C

Silicone-free

Yes

Acetone-free

Yes

AOX-free

Yes

Shelf life from production

24 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information